Domain Model with Superimposed World Diagram
for WUIM
Decide on the entities in the WUIM world and capture them in a domain
model expressed as a collection of rectangles, one for each entity, as
shown on Slides 13, 14, 16, and 19 of the slides about the
Requirements Engineering Reference
Model.
Then divide these entities into the environment and the system.
Superimpose this division on domain
model diagram. You can do this superimposition by drawing a shape enclosing
the environment entities and another shape enclosing the system
entities; then label each shape as ENV or SYS as the case may be,
as was done on the blackbord in class when Slide 13 of the slides about
Requirements Engineering Reference
Model
was shown. Alternatively, you could just mark each domain model entity with
``ENV'', ``SYS'', or both, as the case may be.
If you have done this superimposition correctly, you should be able
to see clearly which entities are in the interface.
You will need to submit both a hard copy AND and an electronic copy of
this deliverable:
- The hard copy should be placed in the designated drop box for
CS445/CS645/ECE451.
- The electronic copy should be emailed to the course account with
the subject
"CS445 Deliverable
Group XX"
where
XX is your group number, with a leading zero if it's less than
10. The file name for the same deliverable should be
"D1-GXX.pdf" where
XX is your group number as before.
PLEASE use this subject line
and file name; otherwise it is difficult for us to organize all of the
submissions. Deliverable 1 must be in PDF format.